Burr-king Model 960-401 Manual do Utilizador descarregar pdf

See our catalog at www.burrking.com Contact us at us at [email protected]

DOC960-401NEWBELT-99 REV08/06

BURR KING MFG. CO., INC.

1220 TAMARA LANE

WARSAW MO 65355

WWW.BURRKING.COM

(660) 438-8998

 (800) 621-2748

FAX (660) 438-8991

January, 05

Dear Customer,

Thank you for purchasing the Burr King model 960-401/960-251 wet grinder. We are confident that it

will add value to your projects. Please note that the belt that is now on the machine (it is orange-brown

in color) is NOT

a wet capable belt.

Do not use water on the belt we have provided to you with the machine, as it may fail to provide the

service you expect, and or physically fail.

Abrasive belts will vary in length, straightness, flexibility, etc. Because of this you need to be

particularly aware when you first install a new belt. If you do the following you will attain greater

satisfaction with each new belt:

Assure the grinder is securely bolted to a stable work surface.

Disconnect the AC electric power from your grinder.

• Push up on the rear wheel-tensioning handle and while holding the handle up push the red button

in the handle center to release the pawl from the ratchet.

• Lower to its lower most position the tensioning handle to remove tension from the old belt.

• Open the safety guard door

• Remove the old belt

• Install the new belt taking care that it is not bent, wrinkled, or otherwise deformed. The belt

should now be around the upper and lower wheel and be slack.

• Without pushing the red button push up on the tensioning handle. You will hear the pawl click as

the handle is moved upward. Push the handle back until you have heard 6 to 7 clicks.

• Manually rotate the belt on the wheels several rotations and see that the belt stays centered on the

wheels within about ¼ inch or less. If it does not, loose the locking handle on the tracking knob

located on the upper left of the machine. CW rotation of the tracking knob will move the belt to

the left, CCW to the right. Turn the knob ¼ turn in the required direction while manually rotating

the belt to observe the tracking effect. Adjust tracking as necessary.

• Close the machine guard door

• Connect the electric source.

• Momentarily engage the motor. The belt should run within ¼ inch of the wheel centers. If the belt

tracks within ¼ inch turn on the machine and slowly turn the tracking knob in the required

direction to fully align the belt.

• Secure the tracking knob locking handle

1 2 3 4 5 6 ... 19 20

Resumo do Conteúdo

Página 1 - Dear Customer

See our catalog at www.burrking.com Contact us at us at [email protected] DOC960-401NEWBELT-99 REV08/06 1BURR KING MFG. CO., INC. 1220 TAMARA LANE

Página 2

See our catalog at www.burrking.com Contact us at [email protected] 2motors. To force these inadequate services to deliver power that is greater than

Página 3 - BURR KING MODEL 960-401

See our catalog at www.burrking.com Contact us @ [email protected] DOC 960401OP-99 08/02 REV A 1BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO

Página 4 - Register online @

See our catalog at www.burrking.com Contact us @ [email protected] DOC 960401OP-99 08/02 REV A 29. Insure that the grinder is located in a work are

Página 5

See our catalog at www.burrking.com Contact us @ [email protected] DOC 960401OP-99 08/02 REV A 3• check for proper operation Using the water syst

Página 6

See our catalog at www.burrking.com Contact us @ [email protected] DOC 960401OP-99 08/02 REV A 4Remember for operator safety and the continued effe

Página 7

SEE PAGES 4 & 5FOR ELECTRICAL945S3343424431245678171891014151112131492527171920212219231213241228291341134013416212 1370717213945 46 4749676669636

Página 8 - last page

945-4S888986878595967997?1394989910010113979280 818283849190TITLEDATE DRAWNREV DATEDRAWN BYSHEETM960-4019/25/2009CMW2 OF 6BURR KING1220 TAMARA LANEWA

Página 9 - Technical tip May 16, 2006

* USES A 011D TOGGLE SWITCH945-4SITEM NO.PART NUMBERDESCRIPTIONQTY.80737AKNOB, HANDLE181737B-1BUTTON182 26PIN, 3/32 x 3/8, ROLL PLTED183737DSPRING, RE

Página 10

12354 7689111069 5291213115 SET UPTITLEDATE DRAWNREV DATEDRAWN BYSHEETM960-4019/25/2009CMW4 OF 6BURR KING1220 TAMARA LANEWARSAW, MO. 65355

Página 11 - BURR KING MFG. CO., INC

220 SET UP563487111512134319106952101617142TITLEDATE DRAWNREV DATEDRAWN BYSHEETM960-4019/25/2009CMW5 OF 6BURR KING1220 TAMARA LANEWARSAW, MO. 65355

Página 12 - DOC 960401OP-99 08/02 REV A

This page intentionally left blank

Página 13

TITLEDATE DRAWNREV DATEDRAWN BYSHEETM960-4019/25/2009CMW6 OF 6220V SET UPITEM NO.PART NUMBERDESCRIPTIONQTY.13567-2COVER, 2 GANG, 2 SGL, RCPT, WP123329

Página 14 - 438-8998

BURR KING MFG. CO., INC1220 Tamara LaneWarsaw, MO 65355www.burrking.com(660)438-8998 • 800-621-2748Fax (660)438-8991BURR KING MODEL 960-401 WET GRINDE

Página 15 - M960-401

BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998  (800) 621-2748 FAX (660) 438-8991 June, 2007 Burr Ki

Página 16 - BURR KING

BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (660) 438-8998  (800) 621-2748 FAX (660) 438-8991 August 29, 2007

Página 17 - * USES A 011D TOGGLE SWITCH

See our catalog at www.burrking.com Contact us at [email protected] BURR KING MFG. CO., INC. 1220 TAMARA LANE WARSAW MO 65355 WWW.BURRKING.COM (66

Página 18 - 115 SET UP

See our catalog at www.burrking.com Contact us at [email protected] Continued from page 1 of the work rest (or table) will permit passage of the

Página 19 - 220 SET UP

See our catalog at www.burrking.com Contact us at [email protected] Continued from page 2 Occupational Noise Exposure Burr King products produc

Página 20 - WARSAW, MO. 65355

See our catalog at www.burrking.com Contact us at [email protected] 1BURR KING MFG. CO., INC.1220 TAMARALANEWARSAW, MO 65355WWW.BURRKING.COM(660) 438-

Comentários a estes Manuais

Sem comentários

Burr-king Model 960-401 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Máquinas de moagem Burr-king Model 960-401. Burr King Model 960-401 User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Máquinas de moagem Burr-king Model 960-401